| |
|
|
Sealants
Single-component acrylate sealant “Steez А”
The sealant “Steez A” is designed for mounting of the external layer of field joints for window, balcony and translucent constructions. The sealant meets all requirements of GOST (State Standard) 30971-2002.
Properties
High vapor permeability of sealant
Possibility of application at negative temperatures, up to minus 20oС.
After hardening, the surface plastering or painting are possible
Excellent adhesion to concrete, PVC, aluminium, wood, plaster, brick, natural stone
Adhesion to moist (but not wet) surface
Resistant to the ultraviolet rays, weather impacts, deformation effects
Ready to use
Technical characteristics
Major operating characteristics
Water vapor permeability resistance, m/h Pa/mg, not more than 0.21 at the layer thickness of 5 mm
Adhesion strength with PVC, MPa, not less than 0.1
Adhesion strength with concrete, MPa, not less than 0.94
Adhesion strength with wood, MPa, not less than 0.42
Life time, not less than 20 conditional years
Modulus of elasticity at 50% of deformation, MPa, not more than 0.05
Color: white
Major processing characteristics
Vital capacity (time of surface film formation), not more than 2.0 hours
Yielding at layer thickness of 2mm, not more than 1.0mm
Temperature range of application: from - 20° С to + 50°С
Density: 1450 kg/m3
Package
Plastic cartouche - 440 g (310 ml)
Metallized folic tube - 900 g (610 ml)
Plastic bucket – 7.0 kg
Storage. Transportation
Guaranteed shelf life: 6 months at temperature of not lower than minus 5°С in the undisturbed factory package. Transportation at temperature of not lower than minus 20°С for a period of 30 days and not more than 10 cycle of freezing/defrosting
Single-component acrylate sealant Sazilast 11, STEEZ B brand
The sealant is designed for internal layer of field joints for window, balcony and translucent constructions. The sealant meets all requirements of GOST (State Standard) 30971-2002. For sealing of the external contour, it is recommended to use the sealant STEEZ A.
Properties /Advantages
Low vapor permeability
Possibility of application at negative temperatures, up to minus 20oС
After hardening, the surface plastering or painting are possible.
Excellent adhesion to concrete, PVC, aluminium, wood, plaster, brick, natural stone
Adhesion to moist (but not wet) surface
Resistant to the ultraviolet rays, weather impacts, deformation effects
Ready to use
Technical characteristics
Major operating characteristics
Water vapor permeability resistance, m/h Pa/mg, not more than 2.0 at the layer thickness of 3 mm
Adhesion strength with PVC, MPa, not less than 0.1
Adhesion strength with concrete, MPa, not less than 0.1
Adhesion strength with wood, MPa, not less than 0.1
Life time, not less than 20 conditional years
Modulus of elasticity at 50% of deformation, MPa, not more than 0.05
Color: white
Major processing characteristics
Vital capacity (time of surface film formation), not more than 2.0 hours
Yielding at layer thickness of 6mm, not more than 1.0mm
Temperature range of application: from - 20° С to + 50°С
Density: 1400 kg/m3
Package
Plastic bucket, 7.0 kg
Plastic bucket, 15,0 kg
Storage. Transportation
Guaranteed shelf life: 6 months at temperature of not lower than minus 5°С in the undisturbed factory package. Transportation at temperature of not lower than minus 20°С for a period of 30 days and not more than 10 cycle of freezing/defrosting .
|
|
