Window jamb

Plastic jamb panel RTD
- Plastic jamb panel is made of the high-quality rigid PVC;
- Lacquering, additional painting and special care are not required;
- Ecologically clean, nontoxic material, nonhazardous for population health and environment;
- Keeps its color under action of the ultraviolet rays over a long period of time;
- Coordinates well with such finishing agents as PVC angles; F-profile, platband of jamb + platband cover and other materials for interior finish of jambs;
- Coordinates perfectly in color tones with products made of white PVC profiles;
- Allows easy mounting;

Length: 6000 mm
Width: 600 mm
Thickness: 10 mm
Thickness of ribs: 0.5 mm

* Window jamb RTD easy to install, to ensure easy and fast installation.
* Using the Window jamb of RTD, your production is virtually non-waste, due to a convenient size panels.
* There is an opportunity to vary the angle and oblitsevat surface of different widths.

Our company ships the system of jambs under Menke trademark. The composition of the system for finishing of jambs with the use of:

• PVC panel
• U-shaped profile (self-adhesive)
• End profile 50 mm
• Mounting plate

Owing to the rigid PVC panel with thickness of 12 mm and width of up to 600 mm, this system of jambs allows to face unattractive surfaces after window installation.
The advantages of the jamb mounting are:

• quality jamb surface
• easy and fast mounting
• possibility to face the surfaces of different widths
• minimal labor inputs
• possibility to vary inclination of panel        

Our company offers the GYPSUM BOARD, Laminated, Water-resistantwith thickness of 10 mm that is ideally suited for the internal finishing of window apertures, jambs and rooms.

The gypsum boards made in South Korea (Lafarge) consist of the gypsum core reinforced with special foaming and improving strength additives and coated by cardboard on both sides. The adhesion of the cardboard with the core is provided by adhesives. The cardboard exercises a function of both reinforcing carcass and excellent base for various decorative coats. In our case, it is applied, by the cementing process, white PVC film with thickness of 0.3 mm which goes ideally with the articles of white PVC in the surface texture and color tone.

The gypsum does not contain toxic components and has no adverse effect on the environment.  In its physical and hygienic properties, the gypsum board is ideally suited to finishing of the interior of the living spaces, provides acoustic insulation and optimum moisture content in the rooms and is, sui generis, heat insulation material. The gypsum board belongs to the group of not easily combustible (nonflammable) materials.

The laminated gypsum board is much more efficient in the use than its analogs (drywall, lime-fibrous sheet) because it is two times more light than they which provides ease in cutting and mounting. Thanks to special additives increasing a strength and resistance to moisture effect, it is vastly superior to them in quality. At the moment, our company is ready to offer You:

• gypsum board 1.5 x 1.2 m
• gypsum board3.0 x 1.2 m
• drywall 2.5 x 1.2 m